division1

On the time thing it’s been a 5 year project so it’s been spread out. But I’m a full time firemen so I work one day on then off for a few plus kelly days and stuff so I have a lot of off time. And I have a very patient sidekick in life and on the water lol she Dosent nag me when I’m out in the shop. I do plan on running the 540s I really like them the boat ran really well with them. Got some parts put on yesterday starting to lay everything out and making plans

Bfoodman

Any chance of a you tube video showing the boat - and perhaps a bit of discussion on the plans for getting it all back together?

division1

Finally got all the parts laid out. Started putting some things back together the mrs boating queen is clean parts and we been slowly putting things together !

division1

Side vents on

Bilge wiped down starting to map things out

Door track and steps in

Cleats are in

division1

All the tracks and mounting brackets are there bolted with lock nuts so many boats I have worked on that just use #8 screws all those screws come loose and the holes all striped so we threw bolted counter sunk all heads and such so it takes a long time lol working on windscreen know

division1

Any one know of a good clear coat for aluminum? Have some parts that need something on them there raw aluminum at the moment

1Zoom

Cerakote seems to hold up well, Dan had it done on the tabs I made for him and they still look great. There is also a paint manufacturer that makes a prep and clear for raw aluminum. It is used in the sign industry. Check with a local large size sign company. I will ask a buddy of mine that owns one and post it when I get a name.

IGetWet

This is what was put on my AL trailer. Still looks good after 4 seasons, but probably only saw salt and brackish water for 1 season.

https://sharkhidestore.com/products/...num-protectant

division1

Perfect thanks ! Ok drive tanks, ok so I used to run the clear Hardin marine mounted on the transom. What do you guys think about the stick tanks on the inner transom assemblies. I know you have to pull the dip stick to check them and I’m ok with that. I’m just trying to limit the amount of hikes in this nice new smooth transom lol. I also have some Hardin marine fuel filter heads I’m not going to use either I’m just going to run the stock ones on the moter I don’t see the need to run 2 sets of filters.

division1

Has anyone sandblasted trim tabs and has them powder coated ? Wondering if the sandblasting would pit them up ? Or the power coating would get in to the holes and not let the pins go back in ?