Cigarette Topgun
#543
Registered
Thread Starter
Yea for sure I’ll reach out. I’m going to make it nice down there just real simple.this is going to be all all meat and potato straight bottom I have a speed goal in mind and want a wave crusher. I’m over build the cabin stringers and structure so it’s solid in the old Lake Erie!!
The following users liked this post:
thisistank (10-04-2020)
#545
Registered
Thread Starter
3 layers bonded
3 layers trimmed and ready to install. I attached the 2x4 for extra side support and to help get the thing in the boat something to hold on to lol
Trimmed up the top with saw
Sunday funday family day 😂😂
All leveled and braced In place
First two layers of tabbing on I’ll come back and fill voids with thickened resin and then tab other side and
The following users liked this post:
offshoredrillin (10-05-2020)
The following users liked this post:
Bfoodman (10-05-2020)
#550
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,856
Received 3,258 Likes
on
1,054 Posts
Hey just a thought, while you have this thing torn all the way down. Have you considered doing the cut out / storage areas in the gunnels on the sides of the rear bench when you get to the cockpit interior? Like a recessed area for a cup holder / storage / LED light / speaker / etc. I've seen a couple guys redo their cig interior and add these recesses and it looks great, is functional and a great use of dead space.