Cigarette adventure year 5
#21
Charter Member#568
Charter Member
Does the clear film provide any better traction for walking on without slipping ? What ratio do you have with the new drives?
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#22
VIP Member
VIP Member
Looking good Daniel, Its gotta be the nicest tank out there! You’ve set the bar brother! I’m really hoping someone buys Beast and does that thing justice... Have a good Thanksgiving.
#23
Platinum Member
Platinum Member
Don't use mr. gasket anything........
#24
Registered
Thread Starter
1.53 according to speed/rpm. Old ratio was 1.49.
#25
Registered
Thread Starter
#26
Platinum Member
Platinum Member
wow, starving that engine of oil, that could have got expensive.... I've always had good luck with felpro, and no cork for me
#27
Registered
Thread Starter
Pressure was fine at low rpm but started to decrease after 3500. Now it`s obvious why .
I`ve used the one piece gaskets in the past and those damn things leaked. Tried the cork, no leaks but then this so this time I`ll go:
https://www.hardin-marine.com/p-1177...evy-gen-4.aspx
I`ve used the one piece gaskets in the past and those damn things leaked. Tried the cork, no leaks but then this so this time I`ll go:
https://www.hardin-marine.com/p-1177...evy-gen-4.aspx
#28
Gold Member
Gold Member
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
Pressure was fine at low rpm but started to decrease after 3500. Now it`s obvious why .
I`ve used the one piece gaskets in the past and those damn things leaked. Tried the cork, no leaks but then this so this time I`ll go:
https://www.hardin-marine.com/p-1177...evy-gen-4.aspx
I`ve used the one piece gaskets in the past and those damn things leaked. Tried the cork, no leaks but then this so this time I`ll go:
https://www.hardin-marine.com/p-1177...evy-gen-4.aspx