TRS drives for KONRAD 540 HD
#1
Registered
Thread Starter
Join Date: Dec 2018
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
TRS drives for KONRAD 540 HD
Anyone ?? Swap TRS drives for Konrad 540 HD's on a Straight bottom 38 cigarette top gun with notched transom ? any feed back on success or tweaking needed would help ! Thx
#2
Platinum Member
Platinum Member
There have been several do this upgrade, IMO its one of the most cost effective upgrades you can do on a flat deck, unbolt the TRS and bolt on the Konrads, finding them used is tuff because they work so well. my old Kevlar boat had them at one point previous to me owning it.
#4
Platinum Member
Platinum Member
Like I said, they were on it before I owned it, but was told it handled very good, the TRS on a gun are pretty deep, the Konrad is about 2" shorter so no spacer was needed
#6
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,896
Received 3,307 Likes
on
1,075 Posts
There have been several do this upgrade, IMO its one of the most cost effective upgrades you can do on a flat deck, unbolt the TRS and bolt on the Konrads, finding them used is tuff because they work so well. my old Kevlar boat had them at one point previous to me owning it.
#7
Platinum Member
Platinum Member
As far as I know, not sold and still there, its a nice boat with the #5's and 540's
#9
Gold Member
Gold Member
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
The Konrad is 1.6" shorter, for cost like F2 said it's a great swap, I bought a gun that had 600HP and Konrads ran best of 76 mph and set up for cruise ran 73, they say 2-3 mph over TRS