2008 39 top gun unlimited rework and upgrade project
#11
Registered
This thread is useless without pics man!!!!
#12
Registered
Thread Starter
Here are a few
Port Drive about to go back together
Some of the old parts pulled from Port Drive
430 hours on this
430 hours
Going in to have drive put back on
Dropped her off at Marks. Visual Imagination
@visual imagination getting ready to strip her down.
Port Drive about to go back together
Some of the old parts pulled from Port Drive
430 hours on this
430 hours
Going in to have drive put back on
Dropped her off at Marks. Visual Imagination
@visual imagination getting ready to strip her down.
#13
Platinum Member
Platinum Member
Mark and his crew are top notch..........those gears and bearings look toast
The following users liked this post:
Nothing personel 353 (06-04-2020)
#16
Registered
Beautiful boat. Man that gear was pitted and that bearing definitely got hot.
#18
Registered
Thread Starter
Got some updated pics from Mark today @ visual imagination. This boat will look better then it did when it was originally done. Mark is a perfectionist and that is why folks take their boats to him. So excited to see it done. Should be done by end of month. Hope to see many of you at the Cig run in June.
#20
Registered
I can't wait to see the boat when it's done. I need to do the same to mine next year. I have about 13 small chips that need to be fixed, at that point, I'm planning on just having the whole boat recleared. Keep the pictures coming.