Go Back  Offshoreonly.com > Owners Forum > Cigarette
SCX or SCX-4 >

SCX or SCX-4

Notices

SCX or SCX-4

Thread Tools
 
Old 04-12-2020, 10:54 AM
  #31  
Registered
Thread Starter
 
Join Date: May 2009
Location: Chicago, IL; Onekama, MI
Posts: 3,888
Received 121 Likes on 66 Posts
Default

Originally Posted by F-2 Speedy
I just measured its 4.375 to 4.5 from the bottom of the hull to the center line of the bullet....
Is yours a 38 or 39. A 38 will be set up deeper than a 39.
endeavour32 is offline  
Old 04-12-2020, 10:59 AM
  #32  
Registered
Thread Starter
 
Join Date: May 2009
Location: Chicago, IL; Onekama, MI
Posts: 3,888
Received 121 Likes on 66 Posts
Default

Originally Posted by IGetWet
Now that F2 mentioned that I looked at that as well, hard to tell depth but looks like a pretty good size notch in that boat! I haven’t looked at a ton of 39s but I don’t recall seeing that big of a notch in others. That would obviously play a big part in drive height.
unfortunately you can’t tell much from those pictures. Even with a great pic it’s almost impossible to tell. Everything needs to be leveled, a pic from a random angle just doesn’t work.
endeavour32 is offline  
Old 04-12-2020, 11:08 AM
  #33  
Platinum Member
Platinum Member
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,736
Received 3,284 Likes on 1,472 Posts
Default

Originally Posted by endeavour32
Is yours a 38 or 39. A 38 will be set up deeper than a 39.
38....but this is an X race boat and Id heard they were set up a little higher than norm...
F-2 Speedy is offline  
Old 04-12-2020, 11:10 AM
  #34  
VIP Member
VIP Member
 
Join Date: Nov 2002
Location: ankeny,ia.
Posts: 4,096
Received 270 Likes on 150 Posts
Default

PBC had the purple 39 center steer for sale 7 or 8 years ago, it had 525’s, I was looking it over pretty good, I do recall the drives being very high, probably only an inch or so below the bottom, I would imagine yours would be in the same neighborhood
JaayTeee is offline  
Old 04-12-2020, 02:50 PM
  #35  
VIP Member
VIP Member
 
offshoredrillin's Avatar
 
Join Date: Feb 2004
Location: Maryland
Posts: 12,236
Received 1,404 Likes on 475 Posts
Default

Originally Posted by F-2 Speedy
I just measured its 4.375 to 4.5 from the bottom of the hull to the center line of the bullet....
the scx is bigger so it sits back a little further
offshoredrillin is offline  
Old 04-12-2020, 02:51 PM
  #36  
VIP Member
VIP Member
 
offshoredrillin's Avatar
 
Join Date: Feb 2004
Location: Maryland
Posts: 12,236
Received 1,404 Likes on 475 Posts
Default

Originally Posted by F-2 Speedy
I just measured its 4.375 to 4.5 from the bottom of the hull to the center line of the bullet....
i meant the op's boat has its, so he has plenty.
offshoredrillin is offline  
Old 04-12-2020, 03:18 PM
  #37  
Platinum Member
Platinum Member
 
F-2 Speedy's Avatar
 
Join Date: May 2012
Location: Midwest & T-Rock
Posts: 10,736
Received 3,284 Likes on 1,472 Posts
Default

Originally Posted by offshoredrillin
i meant the op's boat has its, so he has plenty.
so does mine.......
F-2 Speedy is offline  
Old 04-12-2020, 07:23 PM
  #38  
Registered
Thread Starter
 
Join Date: May 2009
Location: Chicago, IL; Onekama, MI
Posts: 3,888
Received 121 Likes on 66 Posts
Default

Originally Posted by F-2 Speedy
38....but this is an X race boat and Id heard they were set up a little higher than norm...
Is yours running -2 sportmasters? I'll be picking up my boat Thursday, so I'll find out soon, what mine is.
endeavour32 is offline  
Old 04-12-2020, 07:27 PM
  #39  
Registered
Thread Starter
 
Join Date: May 2009
Location: Chicago, IL; Onekama, MI
Posts: 3,888
Received 121 Likes on 66 Posts
Default

Originally Posted by JaayTeee
PBC had the purple 39 center steer for sale 7 or 8 years ago, it had 525’s, I was looking it over pretty good, I do recall the drives being very high, probably only an inch or so below the bottom, I would imagine yours would be in the same neighborhood
I quickly eyeballed mine when I looked at it, and the drives appeared very close to being even with the hull. However without a straight edge, it's really hard to get an accurate guess.
endeavour32 is offline  
Old 04-12-2020, 10:02 PM
  #40  
Registered
 
Join Date: Oct 2007
Location: Grand Haven, MI
Posts: 1,435
Received 170 Likes on 79 Posts
Default

I would measure mine for you but the drives are not on the boat. I would definitely run big props on your boat if possible. The difference between them and bravo props is night and day, especially on Lake Michigan. Mine also sucks to get up on plane even with big props, I have 17/35 herrings
jbraun2828 is offline  


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.