Playboy gets a face lift
The following users liked this post:
Got Cigs (08-26-2022)
08-26-2022, 12:10 PM
#12
Platinum Member
Platinum Member
Looks nice, ITS is so much cleaner, tho bleeding it can be a PITA if not done right believe me I know..........
The following users liked this post:
Got Cigs (08-26-2022)
08-26-2022, 12:23 PM
#13
Registered
Join Date: Aug 2001
Location: Channel Islands, So. Cal.
Posts: 13,830
Received 3,219 Likes
on
1,044 Posts
BAD AZZ Curt!
Right into the museum when you're done!
Right into the museum when you're done!
The following users liked this post:
Got Cigs (08-26-2022)
08-26-2022, 02:29 PM
#14
Registered
Nice. What bilge paint did you use? Looks like gelcoat it came out so well. Of course now the problem is your going to want to keep it clean.
The following users liked this post:
Got Cigs (08-26-2022)
08-26-2022, 02:59 PM
#15
Platinum Member
Platinum MemberThread Starter
I sanded everything with, I believe 80 grit. Didn't go to bare glass, but cleaned/ruffed it all up. Then used oil based rustoleum, gloss white, and a Napa hardner... 1gal paint, 1qt of hardner. Applied with a brush and small roller. Lays on really thick too. I'm gonna have sea dek put in, between the stringers and on the front step.
Last edited by Got Cigs; 08-26-2022 at 03:06 PM.
The following users liked this post:
J-Bonz (08-26-2022)
08-26-2022, 03:19 PM
#17
Platinum Member
Platinum Member
No mine was already done, but when I put the new engines in air was a beach to get out of the system, if you need some pics let me know
08-26-2022, 06:48 PM
#18
VIP Member
VIP Member
Last edited by offshoredrillin; 08-26-2022 at 06:58 PM.
The following users liked this post:
Got Cigs (08-27-2022)
The following users liked this post:
Got Cigs (08-27-2022)
08-27-2022, 10:12 AM
#20
Platinum Member
Platinum MemberThread Starter
its easy, still the 500efi?.. the only thing you need is the harden marine reservoir . I was having issues on my 20, i put the new reservoir on, ran the pump to it. tuned from lock to lock 3 times and system was bled. i salvaged the one from my 20, and it still works but has some corrosion on it. keep the bilge floor as smooth as possible, and even use a thick ceramic on it so if oil or anything leaks it will slide right off.
