Operation 87 Cafe rescue
#212
VIP Member
VIP Member
Looks fantastic, and I’m sure it sounds hair raising! I had played with my exhaust quite a bit on my cafe to keep my tails cool and mitigate any tendency to revert. I was running Hardin Cyclones to a traditional 4 bolt flange tail with a similiar rise to yours. My problem was heat in the riser at idle; couldnt get the heat exchange right. Off idle maybe 1100 rpm on it was good but down low they got hot hot. I ran dumps like yours, had to play around with restrictions while watching water pressure. Keep an eye on your water pressure.
The following users liked this post:
87CigCafe (07-07-2024)
#213
Registered
Thread Starter
Great weekend!
Had a great weekend with the ol girl! We beat on it Thursday Friday and Saturday with no issues FINALLY and I have clean oil for once! Reversion has seemed to be an issue all along? Dry exhaust is loud especially if you are behind it. Going down the lake it’s not terrible but definitely noticeably louder than she was before! I don’t mind it though!
The following 7 users liked this post by 87CigCafe:
105Fountain (07-08-2024), Bfoodman (07-08-2024), HOSSMAN (07-23-2024), RSCHAP1 (07-08-2024), Shah Mat (07-08-2024), sonicss42 (07-07-2024), thisistank (07-23-2024)
The following users liked this post:
87CigCafe (07-07-2024)
#215
Registered
What lake do you boat on?
The following users liked this post:
87CigCafe (07-07-2024)
The following users liked this post:
HOSSMAN (07-23-2024)