Time to Update the 46
The following 4 users liked this post by bshzba:
Got Cigs (03-25-2024), offshorexcursion (03-25-2024), OPS VZLA (03-28-2024), Stuckonstupid (03-25-2024)
#53
Registered
Platinum Member
Ok finally getting this project back going. Its in the paint booth, Mike says he will have interior done my the end of April, Cigarette has been horrible to get anything from and still no answer on new style parts so we will have to move forward and change plans. Does anyone know what the windscreens are made of? Or where I can get one or have one made? I would like to etch cigarette in it and light it up if possible.
#54
VIP Member
VIP Member
Carter still has a couple smoked wind screens for 38s of mine to sell also.
#55
VIP Member
VIP Member
if your windshield is in good shape and the holes line up, most any local acrylic shop can reproduce it and probably engrave it as well. the tough part of buying a used one is often the holes arent in the same spot
#57
Registered
Platinum Member
Windscreen was not much. Im not sure about the mount, my boat already had the mount. Id reach out, he will most likely be better priced than LipShip and he's super easy to work with.
#58
VIP Member
VIP Member
I had mount from Lip Ship and Carter had smoked screen made local. He may have a source for mount now. I will ask as he is working on my Cobalt these days.
#59
Registered
I am looking for a mount for my 35 TS, i guess it is just a little different than the 38 somehow. Was hoping to get Got Cigs old windscreen from his playboy in LOTO this June and hoping this Carter guy has the specs for a 35 TS widscreen