Bullet broke 100MPH
#1
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Took the bullet out this weekend. Ran flawlessly, and w/ 1.5 drives spun 32's to the rev limiter, and ran 101. With 1.36 and 32's spun 5600, and was still 99MPH. Did the whole tickfaw 200 run, and broke a drive at the end. Will continue to test, and should see 105+ with correct props and lab finishing.
#6
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Will post pics soon. Boat handled great, got a bit loose, but leveling the tabs fixed it. Acceleration was ungodly. I'm wating on drive parts, and will begin dialing boat in.
Steve
Steve
#10
Registered
Thread Starter
Join Date: Mar 2002
Location: Louisiana
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks,
2 TMP850HP SC. Idles at 800 RPM, am gonna put drives back together, and dial in, our 36' flatdeck is almost finished in the paint booth, so the bullet will have to go soon, we're gonna miss it after this weekend.
Our 30' Phantom also ran 105+ with the new whipplecharger.
Steve
2 TMP850HP SC. Idles at 800 RPM, am gonna put drives back together, and dial in, our 36' flatdeck is almost finished in the paint booth, so the bullet will have to go soon, we're gonna miss it after this weekend.
Our 30' Phantom also ran 105+ with the new whipplecharger.
Steve