Cig Pics Let's See em'
#3081
VIP Member
VIP Member
Yes, I am hoping damper plate/engine plate/flexplate (whatever you call it) maybe loose/busted. Honestly sounded like the drive shaft banging around, but all felt good, spun by hand in nuetral, and we still had forward movement on that engine in gear, shifted fine in and out of gear. We'll know more tonight.
#3082
Neno the mind boggler
VIP Member
Frick , my record for annual running time for the past three years is 22 minutes . This year after new alum heads and a complete short block rebuild the year before I figured there were no more parts to break as I had replaced pretty much everything but the blocks cranks and intakes . This year after 22 minutes of outstanding performance broke the push rod guide plate on the number 2 intake valve on the port motor . Like Dan I am the cheif bottle washer . But I am not going to let that tub beat me . I will figure out what went wrong . If all goes well I'm shooting for a whole hour next summer . I don't want to set my sights too high .
RG.
RG.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#3084
Registered
Last weekend drive 5.5 hours to Lake Erie, this probably $50 seal decides to pop out in the extension box. Thought I was done and motor needed to come out to get back there but somehow, someway, I layed across the motors till 3pm and got her back in .Ended up at Kellys Island same day.
It`s a love hate relationship for sure.
Love.
Hate.
Rick hows that hatch coming along?
It`s a love hate relationship for sure.
Love.
Hate.
Rick hows that hatch coming along?
#3085
Registered
Dan next time at I am at the shop I will send some updated pics . Just doing final fitting . I got side tracked running my boat for 22 minutes this summer . I think I spent more time getting to and from
The lake. I think I have the guide plate issue solved make actually run it again before the snow flies . RG.
The lake. I think I have the guide plate issue solved make actually run it again before the snow flies . RG.
#3086
VIP Member
VIP Member
#3087
Registered
Rick you better hurry, it`s Canada you might be shoveling snow next month ha! Sorry to hear about your troubles ..
#3088
Registered
How did you even realize that seal popped? Got lucky getting that one in!
#3089
Registered
I always check all the resevoirs before departure, it was empty.
Had to go thru the bolt holes with a nut driver .. everytime I tap one side in the opposite side would pop out.. it was a real fun job.
Had to go thru the bolt holes with a nut driver .. everytime I tap one side in the opposite side would pop out.. it was a real fun job.