Post your Oldschool ride!
The following 2 users liked this post by Twin O/B Sonic:
1983ScarabIII (03-08-2023), hblair (03-08-2023)
03-08-2023, 07:14 AM
#2212
I used to spend summers on lake Michigan as a kid with my Aunt and Uncle, and every once in a while, I'd look out the window and see Scott DuVall and the Damn Manta on a run. My grandfather worked part time at Doyne's in Portage and got me a Damn Manta Racing license plate cover; still think I have it in a box somewhere. Glad to see the boat is still around.
03-08-2023, 01:24 PM
#2213
Registered
1997 29
The following users liked this post:
1983ScarabIII (03-08-2023)
The following 12 users liked this post by hblair:
105Fountain (03-08-2023), 1983ScarabIII (03-09-2023), blkmtrfan (03-08-2023), J-Bonz (03-08-2023), miller high life (03-08-2023), resurrected (03-09-2023), speicher lane (03-08-2023), Sydwayz (03-09-2023), TexomaPowerboater (03-08-2023), TomR (03-13-2023), TomZ (03-09-2023), Wildman_grafix (03-09-2023)
03-08-2023, 04:02 PM
#2215
Platinum Member
Platinum Member
The guy on the other side is thinking that must be one of them thar ceegar boats..............^^^^
03-08-2023, 05:16 PM
#2216
VIP Member
VIP Member
That guy was cool, but you are correct, just about everybody in Alabama calls them cigar boats, but with the emphasis on "cigaaaaaaar". (the longer the word is said, the longer the boat.
The following 2 users liked this post by hblair:
TexomaPowerboater (03-08-2023), Twin O/B Sonic (03-08-2023)
The following 7 users liked this post by OSClassicFan:
1983ScarabIII (05-17-2023), blkmtrfan (03-09-2023), cheech (03-09-2023), DrFeelgood (03-09-2023), hblair (03-09-2023), J-Bonz (03-09-2023), kreed (03-23-2023)
03-09-2023, 09:51 AM
#2218
Platinum Member
Platinum Member
nice hot rod.......^^^.........good to see some new posters showing up
03-09-2023, 11:02 AM
#2220
Registered
1 of the last 32 hustlers fiore made i picked up last yr been doing a 2023 resto/update on it pulled apart birth and redid and chopped up dash and recofigured and updated ,,,waiting on knobs to come back from powder coating but coming along
The following 2 users liked this post by johnmiffco:
Jeff Maes (08-05-2023), miller high life (08-03-2023)
