#99 gentry 46' scarab restoratoin
#263
Platinum Member
Platinum Member
Thread Starter
As for the dry breaks you just push down with your fingers and insert a piece of PVC tubing and put the fuel fill in that .
#265
Platinum Member
Platinum Member
Thread Starter
WE are finally ready to start the engines in the boat we pumped up fuel pressure and found no leaks so tomorrow is the big day [ATTACH=CONFIG]559689[/ATTACH]
I can't believe all of the plumbing that was in this boat there is so much hose I could have plumbed 3 regular boats. But its done
I can't believe all of the plumbing that was in this boat there is so much hose I could have plumbed 3 regular boats. But its done
Last edited by Team Archer; 09-23-2016 at 10:10 PM.
#266
VIP Member
VIP Member
WE are finally ready to start the engines in the boat we pumped up fuel pressure and found no leaks so tomorrow is the big day [ATTACH=CONFIG]559689[/ATTACH]
I can't believe all of the plumbing that was in this boat there is so much hose I could have plumbed 3 regular boats. But its done
I can't believe all of the plumbing that was in this boat there is so much hose I could have plumbed 3 regular boats. But its done
#269
Platinum Member
Platinum Member
Thread Starter
Well all is good they all started and sound great. Now its time to put it all together and head for the water.[ATTACH=CONFIG]559713[/ATTACH] Sorry I have video but can't figure out how to load it but its on our facebook page if you want to check it out. Thanks Dan