#99 gentry 46' scarab restoratoin
#31
Registered
Join Date: Oct 2004
Location: clarksburg nj
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
hi dan rather than bother u on the phone I have another question after I put the next 2 stringers in one each side of the center stringer that are 26 inches apart where would the supports between them go say how many inches off the transom going towards the front of the engine compartment how many and how high and what basic shape so they don't interfere with the engine placement if u rather I call u then ask on this forum just let me know but I fell like I interrupt u during your working hours thks again rich d
#33
Gold Member
Gold Member
Will the paint job on Smokin Joe be similar or changed completely? One of my favorite boats!
#34
Platinum Member
Platinum Member
Thread Starter
New main bulkhead in engine room replaced and mid stiffeners repaired[ATTACH=CONFIG]531113[/ATTACH][ATTACH=CONFIG]531114[/ATTACH]
#37
Platinum Member
Platinum Member
Thread Starter
First layer of the new transom is in [ATTACH=CONFIG]531232[/ATTACH][ATTACH=CONFIG]531233[/ATTACH] Cockpit floor structure is in ready for the new floor, note all the replacement structure in cockpit is structural foam.[ATTACH=CONFIG]531234[/ATTACH]
#38
Registered
Join Date: Oct 2004
Location: clarksburg nj
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
hey dan sent u my email address man I thought I had a lot of holes in my transom another question I forgot to ask u does it matter what side the forward motor is on not that im ready yet just curious your project is moving along nicely wish we had your weather all year fighting winter makes everything take twice as long
#40
Platinum Member
Platinum Member
Thread Starter
No it doesn't matter witch engine is forward but I always put my starboard motor forward have been doing that way for the last 20 years so why change and follow the pack.