scarab50

hi dan rather than bother u on the phone I have another question after I put the next 2 stringers in one each side of the center stringer that are 26 inches apart where would the supports between them go say how many inches off the transom going towards the front of the engine compartment how many and how high and what basic shape so they don't interfere with the engine placement if u rather I call u then ask on this forum just let me know but I fell like I interrupt u during your working hours thks again rich d

Team Archer

I will put together a drawing for you in the next day or so

Karaokemike

Say it isn't so!!!!

Will the paint job on Smokin Joe be similar or changed completely? One of my favorite boats!

Team Archer

New main bulkhead in engine room replaced and mid stiffeners repaired[ATTACH=CONFIG]531113[/ATTACH][ATTACH=CONFIG]531114[/ATTACH]

Team Archer

Transom is patterned and fitted ready to go in tomorrow first layer.

BabyFormula419

Following!!!

Team Archer

First layer of the new transom is in [ATTACH=CONFIG]531232[/ATTACH][ATTACH=CONFIG]531233[/ATTACH] Cockpit floor structure is in ready for the new floor, note all the replacement structure in cockpit is structural foam.[ATTACH=CONFIG]531234[/ATTACH]

scarab50

hey dan sent u my email address man I thought I had a lot of holes in my transom another question I forgot to ask u does it matter what side the forward motor is on not that im ready yet just curious your project is moving along nicely wish we had your weather all year fighting winter makes everything take twice as long

scarab50

ops meant my mailing address

Team Archer

No it doesn't matter witch engine is forward but I always put my starboard motor forward have been doing that way for the last 20 years so why change and follow the pack.