#99 gentry 46' scarab restoratoin
#61
Registered
Join Date: Oct 2004
Location: clarksburg nj
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
hey dan that floor looks like it was poured its so smooth looks good do u think I need 4 layers on my transom I did 3 half inch ply with a layer of glass between each then one layer 1708 and one regular glass to smooth it out some should I go back over it with another 1708
#66
Registered
Join Date: Nov 2008
Location: Poole, UK
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
How did you get on with your visit to the Gentry containers???? Did you get some origional Gentry turbo motors???? Looks like your fitting Y pipes, were they origional spec or are you using them just to free up some space with a triple installation???
Any progress with Smokin Joe? Do you know what colour scheme is going to be used?
Any progress with Smokin Joe? Do you know what colour scheme is going to be used?
Last edited by Ratman72; 11-22-2014 at 03:15 AM.
#67
Platinum Member
Platinum Member
Thread Starter
Well as far as the containers go the guys talking about them don't own them and the family that does wants to wait till spring to open the containers long story. So the plan at this time is to build three brand new motors using original Gentry parts from Carson Brumett exhaust and intercoolers ect. the rest we will build in house. and yes the boat ran with Y pipes originally those are the original holes. As far as Joe goes we have been playing with it. Runs good Very heavy! As far as paint we are looking to keep the name and design but change the colors. Something more modern.
#70
Platinum Member
Platinum Member
Thread Starter
Work continues on Gentry[ATTACH=CONFIG]534574[/ATTACH][ATTACH=CONFIG]534575[/ATTACH][ATTACH=CONFIG]534576[/ATTACH] Start laying out the motor mounts. We are using the original alum. brackets that were still up in the front of the boat. Body work has begun[ATTACH=CONFIG]534577[/ATTACH]