27’ avanti

Reply Subscribe

Thread Tools

07-11-2023, 09:47 AM

#11

Pt6

Registered

Thread Starter

Join Date: Jun 2022

Posts: 6

Likes: 2

Received 1 Like on 1 Post

Mute point at this time, the boat is FAR from advertised. To do that correctly and right, youd have to take the top of the boat, transom is gone, theres delam from glass to wood, foam around the tank is totally saturated like BAD, it had have been sitting for atleast all of 10 years. Its trashed

07-11-2023, 09:52 AM

#12

speicher lane

Registered

Join Date: Jul 2007

Posts: 3,302

Likes: 3,290

Received 807 Likes on 455 Posts

tub grinder .....or CC/OB conversion (kidding)

The following users liked this post:

Pt6 (07-11-2023)

07-11-2023, 10:04 AM

#13

Pt6

Registered

Thread Starter

Join Date: Jun 2022

Posts: 6

Likes: 2

Received 1 Like on 1 Post

Quote:

Originally Posted by speicher lane

tub grinder .....or CC/OB conversion (kidding)

your being nice, unless its a full total restoration, send it to a landfill

07-12-2023, 10:34 AM

#14

12meter joe

Registered

Join Date: May 2012

Location: MI

Posts: 1,528

Likes: 133

Received 202 Likes on 55 Posts

I ran 1000hp through a Konrad 540 and bam1550 trans on an old 26' martini for 3 years without a single drive issue. Boat ran 100mph with a 34p 5 blade. Maybe the konrad is a good alternative for you?

07-12-2023, 11:12 AM

#15

Pt6

Registered

Thread Starter

Join Date: Jun 2022

Posts: 6

Likes: 2

Received 1 Like on 1 Post

Quote:

Originally Posted by 12meter joe

I ran 1000hp through a Konrad 540 and bam1550 trans on an old 26' martini for 3 years without a single drive issue. Boat ran 100mph with a 34p 5 blade. Maybe the konrad is a good alternative for you?

didn’t buy the boat. It’s trashed, too needs to be separated to fix the issues