pinball

like to think it will do 100 keep us posted trying to get 100 out of 34 sutphen tsunami race boat. we just installed 725 blower motors.. first run 28 props to small 70 at 4000 82 at 5000. never ran more than three quarter throttle. 32 s on the way.

stainless

Try putting Kiss Cote on the bottom and drive lowers, I picked up 2-3 mph on my 343 with this

TeamSaris

That may very well be this boat in that picture

NASCAT

I don't believe so, the boat w/ the whipples is in Ohio, original owner, install performed by Sterling is what I've been told.

pinball

today with 32 s 96.8 one motor 6000 one motor 5500 bad fuel pump.. it was already replaced with one not exacty the same one as other. we were told it would work the same . it died at end of day . it needs 34 s . and proper pump 100 mph easy . can t wait. 34 sutphen tsunami. race boat. new 725 blower motors

NASCAT

That's very impressive, nice work. Are those Merc or Herings. 4 or 5 blades if you don't mind me asking?

pinball

regular 4 blade mercs. no lab finish probably would be overkill. we do not want to get to crazy with that boat.its not that heavy and top speed in its history was 98 but most of the time it raced with 570 s top speed 86..we will go over 100 then probably stay in the low 90 s,even on a good blast..well at least thats the plan.the cornering on that boat at 70 to 80 is unbeleavable.its the real deal .so glad i got this thing.

TeamSaris

The Cobalt is at 98 and runs out of prop, 32s on 1.3.6 gears. 34s are junk (bravo 1s) so to 5 blades we go!

Apexwarrior

You guys have done an amazing job with this project. It's kind of like the pontoon boat at LOTO, the ultimate sleeper!

Its beginning to look like I may have to talk to Jason about upgrades. I may get outrun by a Cobalt!

NASCAT

When can we see a few pics of the sleeper??