Spinning In or Out
#1
VIP Member
VIP Member
Thread Starter
Spinning In or Out
Noticed mine was spinning in this winter. Just switched to out and seems to be better as not as much transom lift.
500 EFIs. Still have not pushed it for any top speed runs.
Also i can hardly even trim drives our at all or they just start blowing out.
What are you guys experiencing?
Yea I know- I have not removed the Cig stickers yet
Last edited by Quinlan; 07-11-2023 at 05:39 AM.
#2
Registered
Pretty sure that boat would have left Cobalt with them spinning out. What props are you running?
#3
VIP Member
VIP Member
Thread Starter
28 Bravo 4 blade. Handles Much better spinning out.
The following 2 users liked this post by Quinlan:
105Fountain (07-23-2023), Knot 4 Me (07-25-2023)
#4
Registered
I just pulled boat and reset recalibrated the drive indicators this am…
what appears to be where it will run… is set at 3/4… when I got the boat last week and went out first time I was getting rooster… seems like u can’t trim out that much… only saw 60 on gps… hoping now with knowing the indicators and have them matched now I should see 65-67 at 4900 as test report says
26p bravo 1 spin out
what appears to be where it will run… is set at 3/4… when I got the boat last week and went out first time I was getting rooster… seems like u can’t trim out that much… only saw 60 on gps… hoping now with knowing the indicators and have them matched now I should see 65-67 at 4900 as test report says
26p bravo 1 spin out
#5
VIP Member
VIP Member
Thread Starter
I cannot trim out much at all. Starts blowing out real fast.