Water Pressure breaker
#1
Registered
Thread Starter
Join Date: Jun 2013
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Water Pressure breaker
Anyone know what the water pressure breaker on the breaker panel in the cabin of a 2005 36CC does? I have separate fresh and salt water pump switches on the dash that work those pumps. I’m trying to figure out what the breaker below does. When I flip it on, I hear a pump come on that sounds like it’s near the bathroom.
#2
Registered
pressure pump for the sink and head?
Easy to check.. with the breaker off, turn the water in the sink on and run down the water/pressure. With the water pressure running low, turn on the breaker - if the pressure bumps up - that's definitely what it is for.
Easy to check.. with the breaker off, turn the water in the sink on and run down the water/pressure. With the water pressure running low, turn on the breaker - if the pressure bumps up - that's definitely what it is for.
Last edited by speicher lane; 03-11-2020 at 08:46 AM.
#3
Registered
Thread Starter
Join Date: Jun 2013
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
doesn’t seem to make any difference with the breaker on or off, tried that.
#4
Registered
Thread Starter
Join Date: Jun 2013
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
the sink and head run off the fresh water pump switch on the console.
#6
Registered
Overload protection for the water pumps? The switches at the helm most likely just that, a switch, not a circuit breaker. Just from your description to me it sounds like if water pressure got too high from a pump running too long etc, the pump overloads, draws too much current and the breaker trips. I could be looking at it totally wrong but that’s what I get out of it from the description.