Kiekaffer Trim Tab Template
#13
Hurley
Gold Member
Join Date: Jan 2004
Location: Ventura, CA
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Thats a really slick idea. I couldn't visualize the description given earlier. I've made that mistake before drilling on one side and it comes out Arss crocked on the other. Fortunately it wasn't on the boat.
#14
Registered
Thread Starter
Join Date: Nov 2004
Location: Ocean Pines, Maryland. Wish I was at MANGOS in MIAMI!
Posts: 831
Likes: 0
Received 2 Likes
on
1 Post
MOBILEMERCMAN.........Thanks again for templates. Tabs are on..it was stilll pain in the azzzzz with the hydraulic tubes. Couldn't remove them without risk of damage. But I got em in.
Transom is 4" thick and of course tubes are 3". So I had to also get creative wuith the tubes , bolts and custom backing plates I made.
I can hardly wait to put the hydraulic lines on. I'm sure this will be fun
Transom is 4" thick and of course tubes are 3". So I had to also get creative wuith the tubes , bolts and custom backing plates I made.
I can hardly wait to put the hydraulic lines on. I'm sure this will be fun