EFI Harness needed!!
#11
Registered
![Default](/forums/images/icons/icon1.gif)
Blown Formula,
I have a wiring harness I took off of my 94 502 mag efi when I converted over to carb. I you are still looking for one let me know. Its a mefi 1. Thanks.
Rob
I have a wiring harness I took off of my 94 502 mag efi when I converted over to carb. I you are still looking for one let me know. Its a mefi 1. Thanks.
Rob
#12
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Can't blame you for switching to carbs after this fiasco!!
Dave was kind enough to supply me with one at a very decent price & it is on the way.
I thank everyone for their input & help. Now I hope this solves the problem we are having. I will update to let you know.
Thanks again!
George
Dave was kind enough to supply me with one at a very decent price & it is on the way.
I thank everyone for their input & help. Now I hope this solves the problem we are having. I will update to let you know.
Thanks again!
George
#13
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Join Date: Jun 2007
Location: Baltimore, Maryland
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
George,
I'm still looking for the the set that I talked to you about. If you have something on the way then I can slow the search abit, I have no idea where I put those d@mn things.
Sulfur1
I'm still looking for the the set that I talked to you about. If you have something on the way then I can slow the search abit, I have no idea where I put those d@mn things.
Sulfur1
#15
Registered
Join Date: Sep 2007
Location: Toronto, Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
#16
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Nigel,
I knew they would test ok! Everything I sent was in excellent condition except that broken nose cone on the one starter. I hope your project gets moving soon!
George
I knew they would test ok! Everything I sent was in excellent condition except that broken nose cone on the one starter. I hope your project gets moving soon!
George