Stringer delamination?
#1
Registered
Thread Starter
Join Date: Sep 2007
Location: Essex Junction, Vermont
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Stringer delamination?
I just finished winterizing. As I was pulling the port battery I tapped the stringer and found the glass is loose from the wood for about six feet. Is there any such thing as an easy repair or should I just start parting out the boat.
#3
Banned
Join Date: Oct 2006
Location: Bradenton Florida
Posts: 5,927
Likes: 0
Received 0 Likes
on
0 Posts
Fixing is NEVER easy.
But it can be fixed .
Did it justcome off or is the wood rotten ?
If it just delamed then cut it of grind the wood and reclass, overlap on each side (about 6 ") and repaint with gelcoat .
But it can be fixed .
Did it justcome off or is the wood rotten ?
If it just delamed then cut it of grind the wood and reclass, overlap on each side (about 6 ") and repaint with gelcoat .
#4
Registered
Thread Starter
Join Date: Sep 2007
Location: Essex Junction, Vermont
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
Havn't opened it up yet. It feels solid behind. Problem is about 50% of it is going to be a real pain in the ass to get to without some major boat taking apart.
#8
Registered
Thread Starter
Join Date: Sep 2007
Location: Essex Junction, Vermont
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts