Looking for upgrades stock 350/260hp
07-15-2009, 07:39 PM
#1
Registered
Thread Starter
Join Date: Jul 2009
Location: Fort Loramie, OH
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Looking for upgrades stock 350/260hp
Looking ideas for upgrades for a stock 350 nothing to serious since were still in the boating season but would like to get some more power out of it. A good set of heads, cam, carb, intake anything you got. Just looking for suggestions or ideas. Thanks
07-16-2009, 08:20 PM
#3
Platinum Member
Platinum Member
I had a Formula 272 with smallblocks and I went .040 over on the bores with complete Eagle rotating assy's with flattop pistons. I used Crane 272 cams with enginequest vortec heads, RPM airgap, Holley 650dp, stock T-bolt IV, GLM 4" thru hull exhaust. Engines dynoed at 365hp/400 ft.lbs. and the boat picked up like 10mph.
07-16-2009, 08:39 PM
#4
Registered
Join Date: Mar 2006
Location: columbus,ohio
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
For the money you would have to spend to get any real improvement out of the small block you can buy a tired gen IV 454 out of the classifieds on here and freshen it up and come out ahead on speed gain if you need speed , you need cubic inches , no way around it
