Will an Alpha transom plate bolt to a King Cobra hole?
10-05-2010, 08:11 PM
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Long Island, NY
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Will an Alpha transom plate bolt to a King Cobra hole?
Hey guys, I am looking at a Four Winns Liberator, and it has a King Cobra transom plate and outdrive, but no motor. The only way I would consider this project, is if a Merc Alpha (Gen 1 or Gen 2) transom plate assembly will bolt up to the king Cobra hole in the transom.
Can anyone tell me if this will work without fiberglass work to the transom???
Can anyone tell me if this will work without fiberglass work to the transom???
10-06-2010, 06:25 PM
#2
Charter Member #232
Charter Member
There was a thread the other day that said that a bravo would bolt up. As far as I know the Alpha is the same bolt patter with two less holes? So you should be ok but don't take my word for it. 
__________________
Put your best foot forward!
Put your best foot forward!
Gold Member
10-15-2010, 09:24 AM
#6
Lakeside Restorations.com
Commercial Member
Yes it is stronger than an alpha, the regular cobra was too. But parts are getting to be a hassle as it has been discontinued for a while now.. 
J / Lakeside
J / Lakeside
__________________
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
www.LakesideRestorations.com 570-639-2628
We Make Fast Toys Faster, Cool Toys Cooler and Old Toys New!.. Performance, Custom & OEM Parts & much MORE![/CENTER]
