Stroking a Reverse Rotation 454
#41
Platinum Member
Platinum Member
Join Date: Apr 2001
Location: Beautiful Fort Lauderdale www.cheetahcat.com
Posts: 10,833
Likes: 0
Received 6 Likes
on
6 Posts
We always ran reverse rotation motors on the cats with arneson drives,I have dyno'ed a bunch of them,The Hp was right there with the standard rotation or a little higher.
#42
Registered
Looks like you are on the right track, Bob will set you up with a couple of torqe monsters.
I use the AC Rapid fire #1's. As far as a oil cooler, I use the EMI 3" combo cooler, you will need big ones with all the weight of the boat. Most guys are using a 750-850 CFM carb on a engine like yours. If you do not have wideband O2 on your boat getting it dyno'd would probably save you some headaches. They could jet it for you and get your mix correct. I have a Holley MPI kit and I tune mine on the fly with my laptop.
I use the AC Rapid fire #1's. As far as a oil cooler, I use the EMI 3" combo cooler, you will need big ones with all the weight of the boat. Most guys are using a 750-850 CFM carb on a engine like yours. If you do not have wideband O2 on your boat getting it dyno'd would probably save you some headaches. They could jet it for you and get your mix correct. I have a Holley MPI kit and I tune mine on the fly with my laptop.
#45
Registered
#49
Registered
Gold Member
Thread Starter
Join Date: Dec 2010
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts