454 issues
#1
Registered
Thread Starter
Join Date: May 2009
Location: Cape Coral, Fl.
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
A little background. 28' fishing boat, 8500 lb fully loaded. 454gen v stock 10 hrs on rebuild by a local machine shop.
Issue- the upper end sounds rattle ish. In trying to find out whats going on I checked out the valve trai in operation, one of the pushrods was spitting oil like a severed artery. All the rest seemed normal. Any ideas.
Issue- the upper end sounds rattle ish. In trying to find out whats going on I checked out the valve trai in operation, one of the pushrods was spitting oil like a severed artery. All the rest seemed normal. Any ideas.
#2
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
A little background. 28' fishing boat, 8500 lb fully loaded. 454gen v stock 10 hrs on rebuild by a local machine shop.
Issue- the upper end sounds rattle ish. In trying to find out whats going on I checked out the valve trai in operation, one of the pushrods was spitting oil like a severed artery. All the rest seemed normal. Any ideas.
Issue- the upper end sounds rattle ish. In trying to find out whats going on I checked out the valve trai in operation, one of the pushrods was spitting oil like a severed artery. All the rest seemed normal. Any ideas.