Mefi Burn & O2 sensors
#1
Registered
Thread Starter
Join Date: Jul 2010
Location: Tualatin, Oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Mefi Burn & O2 sensors
I bought the Mefi Burn software and in order to get the most accurate fine tune, I need to log O2 mixtures.
Where can I buy a set of spacers/O2 bung for my EMI Thunder setup ?
Where can I buy a set of spacers/O2 bung for my EMI Thunder setup ?
#3
Registered
Thread Starter
Join Date: Jul 2010
Location: Tualatin, Oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Join Date: Feb 2011
Location: Brookfield Wi
Posts: 769
Likes: 0
Received 0 Likes
on
0 Posts
My bungs are being welded in the Stainless Marine risers this week. I guess we are going down the same road. My impression is lot's of people have had success with doing this.
#8
Registered
Thread Starter
Join Date: Jul 2010
Location: Tualatin, Oregon
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
I have the aluminum risers. didnt get a chance to call em today, but will tomorrow.
Ive got my tune pretty close, but the time it will take me to learn everything, I could make 20x what it will cost someone to build me a MAP once I have all the data.
Ive got my tune pretty close, but the time it will take me to learn everything, I could make 20x what it will cost someone to build me a MAP once I have all the data.