Just Turbines
#511
Registered
Thread Starter
#512
Registered
Thread Starter
#514
Registered
Which company performed the starter rewind work?
#515
Registered
Thread Starter
Here is a short video taken from one of the crew with a iphone
sorry i did not realize how bald i was i should have colored my scalp with a magic marker.
Marc Granite told me a while back 703,s make a difference. Dam Gina he was not kidding!
Ran strong as a raped ape! Torque gauges pull to 94 psi.
Stay tuned for some better video and details
http://www.youtube.com/watch?v=pGRk9b9-aK0&sns=em
sorry i did not realize how bald i was i should have colored my scalp with a magic marker.
Marc Granite told me a while back 703,s make a difference. Dam Gina he was not kidding!
Ran strong as a raped ape! Torque gauges pull to 94 psi.
Stay tuned for some better video and details
http://www.youtube.com/watch?v=pGRk9b9-aK0&sns=em
#516
Registered
Here is a short video taken from one of the crew with a iphone
sorry i did not realize how bald i was i should have colored my scalp with a magic marker.
Marc Granite told me a while back 703,s make a difference. Dam Gina he was not kidding!
Ran strong as a raped ape! Torque gauges pull to 94 psi.
Stay tuned for some better video and details
http://www.youtube.com/watch?v=pGRk9b9-aK0&sns=em
sorry i did not realize how bald i was i should have colored my scalp with a magic marker.
Marc Granite told me a while back 703,s make a difference. Dam Gina he was not kidding!
Ran strong as a raped ape! Torque gauges pull to 94 psi.
Stay tuned for some better video and details
http://www.youtube.com/watch?v=pGRk9b9-aK0&sns=em
Now, get your self a GoPro and one of these
#517
Registered
Thread Starter
some minor problems like the bildge pump was locked up blowing the breaker
and taking out the brake rite controller which controls the Shift as in forward neutral and reverse on port.
oil line on sump vent -16 was a little loose
N1 idle at 53% which is little fast around the docks. will lower to about 48%
http://www.youtube.com/watch?v=wNcQCSYzMHE
and taking out the brake rite controller which controls the Shift as in forward neutral and reverse on port.
oil line on sump vent -16 was a little loose
N1 idle at 53% which is little fast around the docks. will lower to about 48%
http://www.youtube.com/watch?v=wNcQCSYzMHE
#518
Registered
Thread Starter
#519
Registered
Thank you, For the Fantastic BLAST. few bugs to iron out and U can ring her neck some . . cu Monday am
Last edited by I'CE; 07-18-2014 at 04:57 PM.
#520
Registered
By the way those engines pull like an 8 Horse Clydesdale hitch, or better yet a Freight Train. For "real" what an upgrade, nice work. Jjbgood