MIL Malfunction Indicator Lamp
04-24-2014, 02:38 PM
#1
Registered
Thread Starter
Join Date: Jan 2013
Location: Seatle WA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
MIL Malfunction Indicator Lamp
Anybody ever hooked a 12v bulb up to the pin on the DLC connector, or a volt meter and read pulses for thrown codes?
On a mefi3 it's j2 pin 31 or E/F on the DLC connector.
Thx
Larry
On a mefi3 it's j2 pin 31 or E/F on the DLC connector.
Thx
Larry
04-25-2014, 11:39 AM
#3
Were doomed!
Charter Member
ive seen a posting in the past where someone made a jumper with an LED in it to read the codes...
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
04-25-2014, 11:41 AM
#4
Were doomed!
Charter Member
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
