575 Sci head gasket work ?
07-09-2015, 07:10 PM
#1
Registered
Thread Starter
575 Sci head gasket work ?
Blew a head gasket so was wondering what else I should change while i'm in there and what should I check..
Thinking scorpion racing rockers, push rods and springs.
Thank you
Thinking scorpion racing rockers, push rods and springs.
Thank you
07-10-2015, 07:20 AM
#2
Registered
I just had mine done - ....everything in there was replaced.
Cometic head gaskets
head bolts
valve springs
10* steel retainers
10* valve locks
-Fluor-elastomer seals
roller rocker arms
pushrods
billet double roller timing set
pressure test headers and tails
I did roller cams too - so that added a few more parts, but just plan on replacing all components in the heads.
Cometic head gaskets
head bolts
valve springs
10* steel retainers
10* valve locks
-Fluor-elastomer seals
roller rocker arms
pushrods
billet double roller timing set
pressure test headers and tails
I did roller cams too - so that added a few more parts, but just plan on replacing all components in the heads.
07-10-2015, 07:44 AM
#3
Registered
Platinum MemberJoin Date: Jan 2006
Location: wisconsin
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
I just had mine done - ....everything in there was replaced.
Cometic head gaskets
head bolts
valve springs
10* steel retainers
10* valve locks
-Fluor-elastomer seals
roller rocker arms
pushrods
billet double roller timing set
pressure test headers and tails
I did roller cams too - so that added a few more parts, but just plan on replacing all components in the heads.
Cometic head gaskets
head bolts
valve springs
10* steel retainers
10* valve locks
-Fluor-elastomer seals
roller rocker arms
pushrods
billet double roller timing set
pressure test headers and tails
I did roller cams too - so that added a few more parts, but just plan on replacing all components in the heads.
