how do i pressurize my exaust tails
#1
Registered
Thread Starter
Join Date: Feb 2014
Location: Winchester illinois
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
how do i pressurize my exaust tails
I recently bought new cmi exaust headers because one was leaking and I bent a valve, now I still see a little water up on the collector , i cant seem to figure a way to pressurize the tail to see if it is leaking, any suggestions??
#2
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
rubber drain plug..pump it with air to seal off,,use garden hose on other end..
http://www.petersenproducts.com/114-0_pipe_plug.aspx
check home depot
http://www.petersenproducts.com/114-0_pipe_plug.aspx
check home depot