Raw water pump replace/maintenance
#41
Registered
![Default](/forums/images/icons/icon1.gif)
And the wear plate is universal, either side? There isnt a side that the impeller must seat/sit against?
Sorry for the questions, this is my first time doing this and the Merc Kit doesnt come with any sort of printed directions.
Thanks!
Sorry for the questions, this is my first time doing this and the Merc Kit doesnt come with any sort of printed directions.
Thanks!
Last edited by imartin; 02-26-2017 at 01:17 PM.
#42
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Just need to line up the bolt holes, otherwise it doesn't matter. Don't forget the quad ring between the pump and wear plate
#43
Registered
![Default](/forums/images/icons/icon1.gif)
yes, got that ring in the kit and will make note if it has a top and a bottom when I pull the old one off.....
Really appreciate you all helping out a newbie (on this project).
thumbs up!
Really appreciate you all helping out a newbie (on this project).
thumbs up!