502 Oiling issue
#21
Platinum Member
Platinum Member
if he spun this thing to 2 grand there should be oil in the up top.......even @ idle, the engine was never primed prior to starting ? are the oil lines all stock Merc, if so with the inverted flair ends I dont think you can reverse them........you need to trace out all the lines and make sure.
Last edited by F-2 Speedy; 05-18-2018 at 02:58 PM.
#22
Registered
Thread Starter
Normally the new oil pump comes with the pickup attached, your old one should have been the same way.
Here is the one that should have been in the motor
Genuine Mercury & Mercruiser parts. 827643 PUMP ASSY-OIL Genuine OEM Mercury Marine-Mercruiser part
Others do make a good point that maybe a rocker nut is coming loose or a stud is starting to extract.
It is just a light ticking correct?
Here is the one that should have been in the motor
Genuine Mercury & Mercruiser parts. 827643 PUMP ASSY-OIL Genuine OEM Mercury Marine-Mercruiser part
Others do make a good point that maybe a rocker nut is coming loose or a stud is starting to extract.
It is just a light ticking correct?
#23
Registered
Thread Starter
if he spun this thing to 2 grand there should be oil in the up top.......even @ idle, the engine was never primed prior to starting ? are the oil lines all stock Merc, if so with the inverted flair ends I dont think you can reverse them........you need to trace out all the lines and make sure.
#24
Platinum Member
Platinum Member
did you prime the engine prior to lashing the valves to get the lifters full of oil
#26
Platinum Member
Platinum Member
ya, I know how they work......good luck
#27
Registered
Thread Starter
I wasn't being a smart ass lol, I just assumed you thought I had adjustable rockers. How do you set the last on a bolt down factory rocker? Or do I just loosen all of them and prime engine? If that would be the process no I didn't. I installed engine and then primed engine.
Last edited by Dutchboy; 05-18-2018 at 07:31 PM. Reason: left out info
#28
*
Platinum Member
Seeing we're on the topic can I ask for clarification on a similar observation ?
Stock 502MPI about 265hours Merc 25/40 oil since new. 40psi oil pressure max .
When running if you peep into the fill tube the rocker that is visible is always dry . I've never removed the rocker covers when running though.
Is this really normal ?
On an old Ford 351 that I used to have within seconds of startup you could see oil pissing everywhere all over the push rods and rockers.
Stock 502MPI about 265hours Merc 25/40 oil since new. 40psi oil pressure max .
When running if you peep into the fill tube the rocker that is visible is always dry . I've never removed the rocker covers when running though.
Is this really normal ?
On an old Ford 351 that I used to have within seconds of startup you could see oil pissing everywhere all over the push rods and rockers.
#29
Registered
Thread Starter
Seeing we're on the topic can I ask for clarification on a similar observation ?
Stock 502MPI about 265hours Merc 25/40 oil since new. 40psi oil pressure max .
When running if you peep into the fill tube the rocker that is visible is always dry . I've never removed the rocker covers when running though.
Is this really normal ?
On an old Ford 351 that I used to have within seconds of startup you could see oil pissing everywhere all over the push rods and rockers.
Stock 502MPI about 265hours Merc 25/40 oil since new. 40psi oil pressure max .
When running if you peep into the fill tube the rocker that is visible is always dry . I've never removed the rocker covers when running though.
Is this really normal ?
On an old Ford 351 that I used to have within seconds of startup you could see oil pissing everywhere all over the push rods and rockers.
#30
*
Platinum Member
LoL its funny you reference a Ford. I'm a Ford guy and can say that any SBF I have ever had if you looked in the valve covers there was always puddles of oil. From what I am gathering from the BBC stuff is that, it just oils enough and rolls back down into the head. not a 100% sure though.
By comparison that old 351 even when it was near 20 years old was so quiet the suck of the carb was the loudest thing coming from the engine. I'll always miss that little motor .