Other upgrades to a 502.
#1
Registered
Thread Starter
Other upgrades to a 502.
I will be updating my stock 502 with a pro-charger m3 supercharger kit. I wanted to see what else I should do while motor is out. I will be doing rings, bearings and a freshen up.
would you recommend anything else while the motor is out? If so let me know want to make sure it’s done right and maximize my opportunity.
thank you.
would you recommend anything else while the motor is out? If so let me know want to make sure it’s done right and maximize my opportunity.
thank you.
#2
Platinum Member
Platinum Member
cam, lifters, double roller timing chain, head studs, rocker arms, rocker studs, valve springs, retainers, locks,pushrods, oil lines, oil cooler, oil block and filter adapters, fuel pump, fuel lines, regulator, coupler, oil pan (if your going to stay in it more tahn 20 or 30 seconds at a time), better valves, upgrade to 60 lb injectors unless your not running alot of boost (5 to 6 lbs), upgrade to mefi4 IF your going to run more than 150 kpa/7.25 lbs of boost, few things that come to mind, Smitty
#4
Platinum Member
Platinum Member
That should just about cover it ......................^^^^^^^^^^^^^^....lol
#5
Registered
Thread Starter
perfect! Thanks for info will look at getting these parts. Thanks for the info!
cam, lifters, double roller timing chain, head studs, rocker arms, rocker studs, valve springs, retainers, locks,pushrods, oil lines, oil cooler, oil block and filter adapters, fuel pump, fuel lines, regulator, coupler, oil pan (if your going to stay in it more tahn 20 or 30 seconds at a time), better valves, upgrade to 60 lb injectors unless your not running alot of boost (5 to 6 lbs), upgrade to mefi4 IF your going to run more than 150 kpa/7.25 lbs of boost, few things that come to mind, Smitty
#6
Registered
Thread Starter
#9
Platinum Member
Platinum Member