350 SBC cam
#41
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Listening to a motor will not tell if there would be reversion. SB is saying the cam that was installed can cause reversion
The original factory cam could be reinstalled without issue if the cam is in good shape
The original factory cam could be reinstalled without issue if the cam is in good shape
#43
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
If it was a motor from a truck your still good
#47
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
No offense but I don't understand where the question is coming from. SB said you should use a different cam, ones he pointed out. I said could use the one from the motor the block came with if it was from a truck. I stated the gaskets needed
#48
Registered
![Default](/forums/images/icons/icon1.gif)
Do google search of following:
xm256H-12 offshoreonly.com
xm256H-12 offshoreonly.com
The following users liked this post:
Brandon Shoot (03-18-2021)
#50
Registered
![Default](/forums/images/icons/icon1.gif)
Exactly.
I did that so you can read various threads on the subject. example : Duration and overlap is nit just about sucking water back or not, it also determines rpm power range :thumbs
I did that so you can read various threads on the subject. example : Duration and overlap is nit just about sucking water back or not, it also determines rpm power range :thumbs