what cap and rotor for 454 MPI?
#1
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
What's a good automotive cap and rotor for the 454 MPI? I keep my boat 300 miles away from where I live so...not easy to just go scope out...any help is greatly appreciated.
Thanks!
Thanks!
__________________
Baja 252 Islander
Baja 252 Islander
The following users liked this post:
bajaman (08-21-2022)
#4
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I prefer the Sierra over the Merc/QS as they are all brass and cost less as well https://www.go2marine.com/distributor-cap-18-5354
#6
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Got a cap and rotor from the local O'Reilly's...Sierra 18-5354 just like Griff noted...and a good, brass contact rotor, MPI 2-3210. Cap was $41.99 and the rotor was $3.99.
Thanks again, everyone.
Thanks again, everyone.
__________________
Baja 252 Islander
Baja 252 Islander
The following users liked this post:
Griff (08-21-2022)
#7
Registered
![Default](/forums/images/icons/icon1.gif)
I'd look for this rotor,It has those cooling fins so it keeps moister out and cools the ignition module.
https://nuwavemarine.com/uncategoriz...tor-8m6001252/
https://nuwavemarine.com/uncategoriz...tor-8m6001252/