540 Camshaft needed
#1
540 Camshaft needed
Hello All,
I'm looking to purchase a hydraulic roller cam for a Gen V1 540 engine but can seem to locate one. The engine is natural aspirated 9.5 with 305 AFR heads. Can anyone suggest or have a source for one.
Thanks
Jeff
I'm looking to purchase a hydraulic roller cam for a Gen V1 540 engine but can seem to locate one. The engine is natural aspirated 9.5 with 305 AFR heads. Can anyone suggest or have a source for one.
Thanks
Jeff
#2
Registered
how much power do you want to make?
The following users liked this post:
GLENAMY 242SS (06-22-2024)
#4
Registered
#5
Registered
I've got these in a NA 588 build: Bullet 244/250 112 .664/.663 They make power and sound great.
The following 3 users liked this post by Rookie:
#8
Registered
what gen blocks are your 540's,i have brand new bullet cams for gen 6,240,248 ls112 .620's lift double swap.
The following users liked this post:
SB (06-22-2024)
#9
Also can contact Hardin Marine, they have a couple of real nice HP camshafts, be careful not to go wild and create reversion.
Here is what my buddy runs in his built 540 and I run in my 509. Comp Cams 01-775-8 grind # CBVI XR271HR-12
.591/.601 224/232 @ .050 112 LSA (off the shelf cam).
Here is what my buddy runs in his built 540 and I run in my 509. Comp Cams 01-775-8 grind # CBVI XR271HR-12
.591/.601 224/232 @ .050 112 LSA (off the shelf cam).
Last edited by GLENAMY 242SS; 06-22-2024 at 01:23 PM.
#10
Registered
Also can contact Hardin Marine, they have a couple of real nice HP camshafts, be careful not to go wild and create reversion.
Here is what my buddy runs in his built 540 and I run in my 509. Comp Cams 01-775-8 grind # CBVI XR271HR-12
.591/.601 224/232 @ .050 112 LSA (off the shelf cam).
Here is what my buddy runs in his built 540 and I run in my 509. Comp Cams 01-775-8 grind # CBVI XR271HR-12
.591/.601 224/232 @ .050 112 LSA (off the shelf cam).