1999 Zx
#1
Registered
Thread Starter
Join Date: May 2007
Location: Pflugerville,Texas
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
1999 Zx
I have the twin 350 MAG set up. The port engine is staring to use oil and getting tired. Time to rebuild, any suggestions as for boosting the H.P with in reason ( 385-400) HP. Does anyone know a shop that can do it right? I can pull the engines and have them shipped. i live in Austin Texas
#2
Registered User
Join Date: Feb 2002
Location: Toms River NJ
Posts: 1,422
Likes: 0
Received 0 Likes
on
0 Posts
#3
I have the twin 350 MAG set up. The port engine is staring to use oil and getting tired. Time to rebuild, any suggestions as for boosting the H.P with in reason ( 385-400) HP. Does anyone know a shop that can do it right? I can pull the engines and have them shipped. i live in Austin Texas
I have only heard of a rumor of one smaller ZX going faster but have not seen any proof.
#4
Registered
Join Date: Jul 2007
Location: The Hills TX
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I have the twin 350 MAG set up. The port engine is staring to use oil and getting tired. Time to rebuild, any suggestions as for boosting the H.P with in reason ( 385-400) HP. Does anyone know a shop that can do it right? I can pull the engines and have them shipped. i live in Austin Texas
jim
#6
Registered
Thread Starter
Join Date: May 2007
Location: Pflugerville,Texas
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: May 2007
Location: Pflugerville,Texas
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I used Eddie Young (Young Performance Marine) for the work on my ZX. He is in Tn. His stuff comes with a warranty. He rigged my boat like a $500m boat and it runs in the 90's. Well into the 90's. I will be happy to send you some pics. He has also built some bad ass small blocks.
I have only heard of a rumor of one smaller ZX going faster but have not seen any proof.
I have only heard of a rumor of one smaller ZX going faster but have not seen any proof.
#8
I know of a twin 28ZX that runs in the high 90's. Brian Rose has seen it.
We have been having a great time with these old ZX hulls. They will handle bunches of power. There is a 26ZX on my lake with the same paint job as mine. It is a 65 mph slug. I get these guys in Baja's that confuse me with that guy. A couple of them have some pretty fast boats. I let them run with me to about 75 then I drop the hammer and go flying by at 85 or so. The look on their faces is priceless.
#10
Each one of his engines somes with a build/spec sheet and dyno detail. He usually uses a MEFI -4 on his EFI engines and they can be maintained by a merc mechanic. He showed me some dyno sheets on a 350 mag he did. It made 458hp. His engines have a warranty. Check out boatfreaks and you can see a couple of 1,200's he is building for a Skater.