need more speed zx33 donzi
#21
Registered
Thread Starter
Join Date: Mar 2013
Location: Kuwait
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
q8 is indeed a play on words for Kuwait (his location).
I don't think moving up in props from a 30 to a 32 will help him, he is only revving 5100, Merc Racing 525's are set up ideally to spin 5200 and will not bounce off a stock limiter until 5400.
IMO 32's will kill his rpm unless they are worked over a lot.
Just trim that fat girl out until you break loose then down a notch from there....
I don't think moving up in props from a 30 to a 32 will help him, he is only revving 5100, Merc Racing 525's are set up ideally to spin 5200 and will not bounce off a stock limiter until 5400.
IMO 32's will kill his rpm unless they are worked over a lot.
Just trim that fat girl out until you break loose then down a notch from there....
I go to trim level 5 more rpm I think up to 5300
#22
Registered
Join Date: May 2007
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2000 33zx poker run edition with 600's. i am pushing about 1300 hp. I top out at 85-86 mph GPS.
Trim - 5
Rpm - 5200-5300
I have extension boxes so I am sure that changes the situation..
I would have to say trim up more.
~PG
Trim - 5
Rpm - 5200-5300
I have extension boxes so I am sure that changes the situation..
I would have to say trim up more.
~PG
#23
Registered
Thread Starter
Join Date: Mar 2013
Location: Kuwait
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I will try and till you
Next weekend
#25
Registered
Join Date: Aug 2006
Location: Nashville, TN
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Pgatso, you may a prop issue based on those speeds and that power. When my 575sci engines were stock I hit a best of 88mph on GPS with an average of 86-87 (freshwater). I have had some struggles dialing in a prop to keep me over 90, due to some bow and stern movement, but I'm going to have bblades try to lab that out.