35 zr
#1
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
35 zr
Anybody run shorty's on a 35 ZR with 496's ?
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#2
Registered
Bringing this one back as I’ve wondered the same. Also what the X dim is on a 496 boat without the ITS boxes vs a 525 boat with the ITS boxes...
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
I did find out, the 35zr with 496's and Bravo 1 X drives, have a 1/2" spacer from the factory. Going to remove the spacer and test.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#4
Registered
1/2” spacers with sport master lowers or standards? Most of the 496 35s I see have standard lowers... must be a pretty high X then?
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
Bravo X drives
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#7
Offshoreonly Advertiser
Offshoreonly Advertiser
Thread Starter
I did, haven't run the boat yet, has to warm up.
__________________
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
www.diamondperformanceparts.com
[email protected]
http://www.facebook.com/pages/Diamon...07878772615803
302-521-0123
The Best Parts & Service At The Best Price
#8
Registered
Join Date: Jun 2004
Location: Switzerland
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Just tried a 35ZR with two 496 HO and Raylar with an Imco 2" shorty and 1 1/2" spacer without boxes: it is extremely hard to get out of the water - not recommended at all.