stern power surface drives
#11
I had Sternpowr on my Sonic boat. I had the mx107. They can handle alot of horsepower, and are pretty simple to work on. parts are still available. I had a shop manual for the drives, but I gave it away with the boat. A marine mechanic shouldn't have much trouble working on it, no special tools, but you do need to order the parts and I would try to get the service manual. Props were tough to come by, but I heard they make different shafts now and hubs. Good luck
#12
Registered
Join Date: Aug 2021
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Still have drives?
Actually I just done a search & found his website , Hope this helps. jtmperformancemarine.com
I also have access to 2 MX-107 drives ( a Rt. & a Lt hand ) With 2 really nice Spinelli stainless props.
I also have A 19 spline 25 pitch Nibrel Lt. hand prop that I would sell.
If you are interested in any of this let me know.
I also have access to 2 MX-107 drives ( a Rt. & a Lt hand ) With 2 really nice Spinelli stainless props.
I also have A 19 spline 25 pitch Nibrel Lt. hand prop that I would sell.
If you are interested in any of this let me know.
do you still have the extra drives?
Thread
Thread Starter
Forum
Replies
Last Post
stephen francis
Drives and Lower Units
4
05-07-2008 11:21 PM
TeamPSI
General Q & A
7
03-31-2006 09:48 PM