Pressure drive oil changer thingy
#1
Registered
Thread Starter
Join Date: Sep 2005
Location: Solana Beach,CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
Pressure drive oil changer thingy
I read some posts awhile ago about a converted hudson sprayer. This was adapted to fill lower units. what were the threads used on the sprayer nozzle or what?? Thanks, Dave
#2
21 and 42 footers
Platinum Member
I had one of those cheap $10. 1 qt bottle pumps and took the end off of it and attached it to a 1 gallon $10 garden sprayer. Buy the drive oil in 5 gallon buckets for less than 1/2 the 1 qt price and pour it in the sprayer. Just screw the piece in like normal, hit the "trigger" on the pump and wait a minute or 2 then close it up...your done!!!!
#3
Registered
Join Date: Jan 2004
Location: Saint Petersburg Fl
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
Ditto, I made one from a 10 dollar HD sprayer, clamped the hose and fitting on it, best part is trigger has "lock" position so you can stand there and drink a beer waiting for oil to flow from the vent.
#7
Registered
Join Date: Jan 2007
Location: Alpharetta, GA
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
anyone have a photo of this setup? i'm trying to explain this to my brother and a pic would be helpful.
also, i'm guessing that you don't have to worry with the oil becoming aerated so long as you keep the sprayer filled?
also, i'm guessing that you don't have to worry with the oil becoming aerated so long as you keep the sprayer filled?