Bravo rotation gear use?
#1
Registered
Thread Starter
Bravo rotation gear use?
Which prop rotation uses the lower gear for forward? Prop running clockwise or CCW from the back? oh, standard rotation engine. I can do it the hard way once I get back to my shop but would like to know.
#2
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
In either rotation, the lower gears are used for forward. They simply spin in the opposite direction, for left or right handed props. What controls the lower gears direction is the upper gear set. On right handed props, the bottom gear of the upper set is forward, the top gear of the upper set is reverse.
#3
Registered
Join Date: Mar 2005
Location: Between Lock 17 & 18 Mississippi River
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
I have been spinning a Max Machine right handed, will it do anything to it if I spin it left handed? Having to run with the port trim tab about half way down. Thanks
#4
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
Providing it was set up correctly, you can you can spin it the other way. Just make sure you have a good top cap for left handed operation.
#5
Registered
Join Date: Mar 2005
Location: Between Lock 17 & 18 Mississippi River
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
Max Maxhine Worxs out of Florida, known for high performance built it new, I bought their cast aluminum top cap ( about 2" thick) and drive shower they recomended. Pushing about 800 hp, little scared to reverse rotation in fear of breaking drive.
#6
VIP Member
VIP Member
#7
Registered
Thread Starter
In either rotation, the lower gears are used for forward. They simply spin in the opposite direction, for left or right handed props. What controls the lower gears direction is the upper gear set. On right handed props, the bottom gear of the upper set is forward, the top gear of the upper set is reverse.
Of course I meant the upper gear set (upper or lower gear) Geeze.
#8
Registered
Thread Starter
Thats what I thought too. Thanks. I picked up a spare cheap that is in decent shape except for the upper gear clutch surface and upper clutch surface. Ill use it as a spare for the Stbd. drive only. Ive got others I can use for the Port.
#9
I hate the winter!!
Platinum Member
Join Date: Jul 2001
Location: long island, new york
Posts: 2,707
Likes: 0
Received 0 Likes
on
0 Posts
#10
Registered
Thread Starter