Raising X dimension
11-06-2011, 02:03 PM
#21
Registered
Join Date: Apr 2009
Location: Denmark and hopefully some place nice
Posts: 1,852
Likes: 0
Received 1 Like
on
1 Post
A triple 47 Fountain and a single 271 are two very different boats, what works on the 47 might not work on the 271 at all. I would not compare the two.
11-06-2011, 05:47 PM
#22
Registered
Join Date: Jul 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
x dim on a formula
I do a lot of x dim chandes and Formulas i would notch the bottom in about 10 inches.Raise the x so prop shaft is 4.5 inches below the vee and ru n a 4 blade Bravo 1.Remenber hatch clearance ,exhaust holes ,and the motor will have to be moved back as you go up ! Just talking from past projects we have done.
11-15-2011, 01:25 PM
#23
I do a lot of x dim chandes and Formulas i would notch the bottom in about 10 inches.Raise the x so prop shaft is 4.5 inches below the vee and ru n a 4 blade Bravo 1.Remenber hatch clearance ,exhaust holes ,and the motor will have to be moved back as you go up ! Just talking from past projects we have done.
