Transmission check valves, thermostats
#1
Registered
Thread Starter
Transmission check valves, thermostats
Huber says use both, bam says neither ( or I think I read that) anyone know the reasoning?
I have huber 1330's and about 650hp with Ssm 3's
I have huber 1330's and about 650hp with Ssm 3's
#2
Registered
Thread Starter
Anyone???
#3
Registered
Thread Starter
I see, does anyone know why they wanted the trans fluid so warm??
Ss930's outerlimits uses a seperate trans cooler and 2 ke coolers in the bellhousings. I bet those trannies don't ever see 150*
Ss930's outerlimits uses a seperate trans cooler and 2 ke coolers in the bellhousings. I bet those trannies don't ever see 150*
#5
Registered
Thread Starter
Sounds like the check valves became shutoffs!
#6
Gold Member
Gold Member
Join Date: Jun 2008
Location: Mechanicsburg Pa./ Cape Coral FL
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
no checks, no push lock hose!
Earl is a great source, I had my Huber 1350 done last July. Popped a push lock hose off at the fitting, dumped the fluid and smoked the front pump. New stainless hoses and ends, removed the one way valve( little flow at idle) and fresh Amsoil. The trans works perfect now. Hit it with digital heat gun, stays 120 to 155 during normal running.