Dual Bravos...same clanking noise???
#41
Registered
Thread Starter
#42
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Try this,, remove the prop from one drive and run it,,compare it to the drive with the prop on,,see what the difference is,,,the race on the top cover looks worn,,definitely more than 50 hours on it.,,do NOT add any shims on top
Mike
Mike
#43
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
#44
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
A reputable boat shop took a stethoscope to the drives and pronounced it just standard "lash noise"...especially with the cams in these motors at low idle rpms.
The following users liked this post:
TomZ (08-12-2021)
The following users liked this post:
TomZ (08-12-2021)
#48
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Tropical storms...and maybe gas prices/inflation. :-)
Where are you at on your engines?
My old engines have been recylcled into a 292 SR-1...that should be FAST!
Ps-The marine repair shop owner wanted to buy her from me on the spot.
Where are you at on your engines?
My old engines have been recylcled into a 292 SR-1...that should be FAST!
Ps-The marine repair shop owner wanted to buy her from me on the spot.
Last edited by F14A water jet; 08-13-2021 at 07:53 AM.