Blackhawk Drives
#22
VIP Member
VIP Member
#24
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
This is kind of old now, But in his web site it shows he has 29 pitched blackhawk props in stock, Might be worth a call you never know. Good luck. http://www.thepropellercompany.com/
vette131, If you do a search on Blackhawks either here on [OSO] or over on Performance boats forums you will find some good information about running blackhawks.
Also if anyone needs some information about wanting to buy a used Blackhawk drive, I know of someone that has a few to sell. You can "PM" me and I will give you his number if you want, He has no props though.
vette131, If you do a search on Blackhawks either here on [OSO] or over on Performance boats forums you will find some good information about running blackhawks.
Also if anyone needs some information about wanting to buy a used Blackhawk drive, I know of someone that has a few to sell. You can "PM" me and I will give you his number if you want, He has no props though.
#25
VIP Member
VIP Member
#26
Platinum Member
Platinum Member
#27
Neno the mind boggler
VIP Member
we tried one on a twenty something foot Eliminator cat (24-25?) with pretty good results. The boat was slugish at first and would only hit about sixty at like 4000rpm. Hit the trim and it shot to eighty plus like a bullet, pulled real hard up to speed. Tells me we need to ad some X to the boat but other wise happy with results. Its a great drive but takes some tuning. If you want an alternative Anthony with Wazzup racing in NJ was telling me he believes he can assemble a better variant using XR uppers, an Imco shorty lower case and BravoIII internals.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#28
Registered
Join Date: Mar 2009
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the info i have brand new labed 27p by bronson hill i am runing 22ft daytona 509efi 560 hp an just under 90mph its blowing the props off so i was trying to get a hold of 29 or 31 to see if 100mph possible
#30
Registered