Go Back  Offshoreonly.com > Technical > Electronics
MEFI 1/2 compatability? >

MEFI 1/2 compatability?

Notices

MEFI 1/2 compatability?

Thread Tools
 
Old 10-24-2018, 10:30 PM
  #1  
Registered
Thread Starter
 
Join Date: Oct 2018
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Question MEFI 1/2 compatability?

Hi all, I have a '96 Cobalt 252 with a 7.4 Mag MPI, and I want to send the ECU out to either Whipple or AS&M to have a 93 octane tune put on it. I'd like to keep my original ECU and buy a used ECU to send out for reprogramming. MEFI 1 seems to be WAY more expensive than MEFI 2, and I've found some conflicting info on interchanging them if I have the MEFI 2 tuned. I saw a thread a while back that broke down the MEFI 1/2 serial number series and comparability, hoping someone here has some info on that? Any help is greatly appreciated, already gotten lots of good info here lurking, but I'd like to pull the trigger on the used ECU to get it out to someone for programming.
akorcovelos is offline  
Old 10-25-2018, 07:26 AM
  #2  
LS1
Banned
 
Join Date: Aug 2017
Location: Osaka, Japan
Posts: 54
Likes: 0
Received 0 Likes on 0 Posts
Default

Mefi 1 - 2 -3
LS1 is offline  
Old 10-25-2018, 12:19 PM
  #3  
BUP
Banned
 
Join Date: Jul 2011
Location: Ft. Worth TX
Posts: 9,594
Likes: 0
Received 43 Likes on 37 Posts
Default

Originally Posted by LS1
man that a good info link, Im going to keep that one for reference. haha
BUP is offline  
Old 10-25-2018, 01:23 PM
  #4  
Registered
Thread Starter
 
Join Date: Oct 2018
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

wow, answered all my questions with one link, lol. Thank you!
akorcovelos is offline  
Old 10-25-2018, 04:02 PM
  #5  
Registered
 
Join Date: Jul 2015
Location: Atlantic Southeast
Posts: 1,139
Received 78 Likes on 55 Posts
Default

Originally Posted by akorcovelos
Hi all, I have a '96 Cobalt 252 with a 7.4 Mag MPI, and I want to send the ECU out to either Whipple or AS&M to have a 93 octane tune put on it. I'd like to keep my original ECU and buy a used ECU to send out for reprogramming. MEFI 1 seems to be WAY more expensive than MEFI 2, and I've found some conflicting info on interchanging them if I have the MEFI 2 tuned. I saw a thread a while back that broke down the MEFI 1/2 serial number series and comparability, hoping someone here has some info on that? Any help is greatly appreciated, already gotten lots of good info here lurking, but I'd like to pull the trigger on the used ECU to get it out to someone for programming.
What's the benefit?
Tractionless is offline  
Old 10-25-2018, 06:38 PM
  #6  
Registered
Thread Starter
 
Join Date: Oct 2018
Posts: 7
Likes: 0
Received 0 Likes on 0 Posts
Default

Cleaner idle, higher rev limiter, claims 25hp gain on premium only tune. Basically puts the 7.4 Mag at 410hp which is just shy of he 502 Mag 415hp performance. Should put me into the low 60s. Currently runs 57gps with unbalanced, nicked up B3 26p props (props are being done too.)

Last edited by akorcovelos; 10-25-2018 at 06:43 PM.
akorcovelos is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.