Might be a stupid NMEA question
#1
Might be a stupid NMEA question
So I知 installing a fusion head unit. I would like to connect it to my Garmin screen. My Garmin has nothing else running to it so do I need to build the backbone or can I plug it directly into the screen? Thanks
#2
Registered
You need to build a backbone with power, and termination resistors
#4
"Unregistered Gun"
Platinum Member
What they said and just like this, connect your device to the drop and your ready to go. I powered my backbone from my GPS power switch.
Last edited by Jim Diesel; 02-21-2021 at 12:07 AM.
The following users liked this post:
242LS (02-24-2021)
#8
Registered
This will be everything you need. All connectors, cables, power and terminator resistors needed for your particular install all in one package
Chris
Chris
The following users liked this post:
242LS (02-24-2021)
#9
Registered